PLANET ICA-HM317 - Manual (Page 44)

4.5.1 Image Setting
You can adjust the image parameters in this page.
Here are the descriptions of every setup item:
Item Description
Brightness /
Contrast /
Saturation /
Sharpness
Control the image parameters. Click ‘ - ' to decrease value, or click ‘ +
‘ to increase value. You can also input the value in the field directly.
Default Set all above values to default value ‘128’.
Mirror Check ‘Vertical’ or ‘Horizontal’ box to flip the image vertically or
horizontally, this will help to correct the orientation of image when IP
camera is hanged bottom-up by camera holder. You can click both
‘Vertical’ and ‘Horizontal’ box at the same time.
43