PLANET ICA-HM120 User Manual

Page 45

RTSP Port

Choose the RTSP port. The RTSP protocol allows a connecting client to

start a video stream. Enter the RTSP port number to use. The default value

is 554.

RTP Port

Specify the range of transmission port number of video stream. The default

range is 50000 to 50999. User can specify a number between 1024 and

65535.

NOTE

1. To use the 3GPP function, in addition to previous section, you might

need more information or configuration to make this function work.

2. The camera must be set as Multi-profile mode, not Mega-pixel mode.

Otherwise this device cannot serve 3GPP stream.

3. To use the 3GPP function, it strongly recommends installing the

Networked Device with a public and fixed IP address without any

firewall protection.

4. Port 554 is the default for RTSP service. However, sometimes, some

service providers change this port number for some reasons. If so,

user needs to change this port accordingly.