PLANET ICA-HM125 - Manual (Page 10)

10
3.2 Open the Web-based UI
If IPInstaller finds IP Camera, please select the device you want to view and click
the “Open Web” button. Then you could see the video from IP Camera directly.
1. To access the Web-based UI of the selected unit, run the View > Open Web on
the menu bar.
2. After connected to IP Camera, it will prompt for User Name and Password,
please enter both of admin to continue Web Management. Confirm the installa-
tion as it is required to view the video stream and some operations.
If difficulty is met, please refer to the following steps to establish the connection:
- The IP Camera must be installed and powered ON.
- If the IP camera’s default IP Address (192.168.0.20) is already used by
another device, the other device must be turned OFF until the device is allocated
a new IP Address during configuration.