PLANET ICA-BOX30 - Manual

Note
1. Before connecting power to IR board and
controller of heater/fan, please make sure
the power output voltage is DC 12V (max.
±10%), 1.5A.
2. Power connector information of the
controller:
7. Turn the water proof ring tightly when the cables are
arranged properly.
8. Adjust the camera lens focus. Then push the slide
board until the camera lens pierce through the rubber
membrane on IR board. And, please let the lens as close
to the front glass as you can.
(You can find two small holds on the slide board. After
adjustment, you can use the screw which includes in the
package to fix the slide board on the track.)
9. Close the up cover and lock the back locker after
installing.
(You can use the gray screw which includes in the
package to fix the locker when everything is done.)
– 5 – – 6 –