PLANET ICA-500 - Manual (Page 9)

2
Chapter 2
Basic Setup
This Chapter provides details of installing and configuring the ICA-500.
System Requirements
• To use the LAN interface, a standard 10/100BaseT hub or switch and network
cable is required.
• System Requirement for Viewer & Recorder:
System
Hardware 1-4 cameras surveillance application
• CPU: Pentium III, 800 MHz or above
• Memory Size: 128 MB (256 MB
recommended)
• VGA card resolution: 1024 x 768 or above
4 or more cameras surveillance application
• CPU: Pentium 4, 1.7G MHz or above
• Memory Size: 512 MB or above
• VGA card resolution: 1024 x 768 or above
Note: The listed information is minimum system requirements only.
Actual requirement will vary depending on the nature of your
environment.
L
Hint
5