PLANET ICA-500 - Manual (Page 11)

Setup
Initial setup can be performed either from the web browser or using the supplied
Windows-based camera utilities. This program can locate the ICA-500 even if its IP
address is invalid for your network. You can then configure the ICA-500 with
appropriate TCP/IP settings for your LAN.
Subsequent administration can be performed with your Web browser, as explained in
Chapter 3 - Web-based Administration.
Setup Procedure
Before setup operations
The ICA-500 provides GUI (Web based, Graphical User Interface) for machine
management and maintenance.
To start ICA-500 web configuration, the requirement of the web browser should be:
Microsoft Internet Explorer 6.0 or higher with Java support
Current firmware supports Microsoft Internet Explorer, the Netscape
Navigator support is planned in the future firmware release
L
Note
Default LAN interface IP address of ICA-500 is 192.168.0.20. You may now open your
web browser, and insert http://192.168.0.20 in the address bar of your web browser to
logon ICA-500 web configuration page.
ICA-500 will prompt for User Name and Password, please enter: admin as username
to continue machine Web Management.
Or you may execute IPEditV3 to discover/edit IP address of ICA-500.
Procedures of IPEdit utility
• Please find the IPEditV3.exe in the Utility folder on user’s manual CD
• Double-click
the IPEditV3.exe and the following screen should be prompt on your
computer.
7