PLANET ICA-100C - Manual (Page 10)

8
Manually Assign / Static IP Address
Directly enter the IP address according to local network environment.
The default settings are as follows:
• Default IP – 192.168.0.20
• Subnet Mask – 255.255.255.0
• Default Gateway – 0.0.0.0
Assign Automatically Using
If your network is using DHCP server you can click on “DHCP”. Under this setting
Internet Camera will automatically assign an IP address from DHCP server. Each
time Internet Camera starts up make sure the DHCP server is setup well to be able
to assign a static IP to your Internet Camera. If your application requires direct
connection from an ADSL modem then you need to have an ISP PPPoE account.
Click on “PPPoE” option and enter the User ID and Password into the respective fields.
Internet Camera will get an IP address from the ISP each time Internet Camera
boots.
DNS IP Address:
DNS (Domain Name System) server is an Internet service that translates domain names
into IP addresses. Enter at least one DNS IP address.
Dynamic DNS:
Before using this feature, you have to register an account, password, and DDNS domain
name from a DDNS service provider. Then select one DDNS provider from the pull-down
menu and fill in information in corresponding fields.
Wireless Interface: (ICA-110W only)
Connection Mode:
Use the Connection Mode to determine the type of wireless communication for ICA-
110W. There are two choices of Infrastructure mode, and Adhoc mode.
ESSID (Extended Service Set ID):
This field is used to setup which wireless network to be connected for ICA-110W
communication. The ESSID is a unique identifier shared among all clients in a wireless
network environment. The default Network Name is blank space (NULL String), this
default setting will let ICA-110W connect to ANY access point under the infrastructure
network mode. To connect ICA-110W to a specific access point on the network make
sure to set the ESSID of ICA-110W to correspond with the access point’s ESSID
for communication. Type any string up to 32 characters long (spaces, symbols, and
punctuation are not allowed) in the Network Name box.
To connect ICA-110W to an Ad-hoc wireless workgroup, make sure to set the same
wireless channel and ESSID to match with the PC/Notebook’s setting for direct
wireless communication under the Ad-hoc wireless workgroup.