PLANET CAM-IVP55 - Manual (Page 14)

14
5. Connect a DC 12V power adapter to the Power Input
connector.
(Connect the Video-out port of the camera to a device. As
the connecting method varies depending on the instrument,
therefore refer to the manual supplied with the instrument for
more information.)
Note
Before connecting power adapter to camera,
please make sure the power output voltage is
DC 12V (max. ±10%). If you cannot be sure of
this part, we suggest you use a DC 12V switching
power adapter. It can provide stable power output.
To remove the dome cover using the provided L-shaped wrench,
loosen the screws to secure the temper-resistant housing cover
(with the screws still attached on the cover) to unlock the cover
from the main body.