PLANET WRT-415 - Manual (Page 28)

- 22 -
3.4.2 DHCP
You can configure WRT-415 DHCP server function in this screen. When configuration is completed,
please click “Apply” to save and restart WRT-415.
DHCP Server: Enables the DHCP server to allow the router to automatically assign IP addresses to
devices connecting to the WLAN or LAN. DHCP is enabled by default. All DHCP client computers are
listed in the table at the bottom of the page, providing the host name, IP address, and MAC address of
the client.
Lease Time: Select the proper expired duration of the IP leased by DHCP server.
Start IP: Type an IP address to serve as the start of the IP range that DHCP will use to assign IP
addresses to all LAN devices connected to the WRT-415.
End IP: Type an IP address to serve as the end of the IP range that DHCP will use to assign IP
addresses to all LAN devices connected to the WRT-415.