PLANET WNRT-320GS - Manual (Page 8)

8
Note
2. If you cannot obtain an IP address
automatically from the WNRT-320GS at
Router Mode after clicking the Connect
button on the screen, please follow
the procedures below to configure the
Windows Network Connection.
Step 1. Click “Start” button located at
lower-left corner of the screen.
Step 2. Click “Control Panel”.
Step 3. Click “Network and Sharing
Center”.
Step 4. Click “Change adapter settings”.
Step 5. Right-click “Wireless Network
Connection” or “Local Area
Connection”, and choose
“Properties”.
Step 6. Select “Internet Protocol
Version 4 (TCP/IPv4)” and click
“Properties” button.