PLANET WNRT-320GS - Manual (Page 6)

6
Note
1. Please only charge the battery by the
power adapter and USB cable attached in
the package.
2. When the battery is being charged, the
red LED will be lit up. After the battery
is fully charged, the
LED will become
green. Please do not recharge the battery
continuously at this moment.
3. The battery should be kept in a cool and
dry place.
Step 2: Make sure the operation mode by the hardware
switch is at Router Mode (default setting).
ON/OFF AP/RT
ON/OFF AP/RT
Step 3: Connect the power adapter with the
WNRT-320GS if necessary. And then turn on it.
ON/OFF AP/RT
ON/OFF AP/RT