PLANET WNL-U554A - Manual (Page 30)

150Mbps 802.11n Wireless USB Adapte r
WNL‐U554A
3.2.2 Windows 7 - Use Windows 7 WLAN AutoConfig
WLAN AutoConfig service is built‐in in Windows 7 that can be used to detect and connect to wireless
network. This built‐in wireless network connection tool is similar to wireless zero configuration tool in
Windows XP.
Step 1: Right‐Click on the network icon displayed in the system tray
Step 2: Highlight and select the wireless network (SSID) to connect.
(1) All wireless access points in proximity will be displayed here. If the access point you want to
use is not displayed here, please try to move your computer closer to the access point, or you
can click “Refresh network list” to rescan access points.
(2) Click the access point you want to use if it’s shown, and then click “Connect”.
If you will be connecting to this Wireless Router in the future, check “Connect
automatically”.
Step 4: Enter the network security key of the wireless access point.
(1) The Connect to a Network box will appear
(2) Enter the security key
‐ 30 ‐