PLANET WNAP-7350 - Manual (Page 70)

User Manual of WNAP-7350
-63-
between clients and servers.
Configure the IP address of DHCP Relay host.
5.5.3 VLAN
Figure 5-5-11
The page includes the following fields:
Object Description
 VLAN Setup Check this box to enable the VLAN function.
 Management VLAN ID Configure a specified VLAN to be the management VLAN.
 Enable Management
VLAN ID
Check this box to enable the Management VLAN function.
 VLAN ID
The ID of a VLAN. Only in the same VLAN can a wireless PC and a
wired PC communicate with each other. The value can be between 1
and 4095. If the VLAN function is enabled, when AP forwards
packets, the packets out from the LAN port will be added with an