PLANET WNAP-7200 - Manual (Page 43)

4.4.5 Advance
The Station Advanced Configuration page shows the settings and current operation status
of the station.
Wireless Mode:
Select wireless mode. 802.11a Only, 802.11a/n mix mode are supported.
Country Region Code:
This field displays the region of operation for which the wireless interface is intended.
TX Rate:
Manually force the Transmit using selected rate. Default is auto.
TX Burst:
Frame burst mode.
HT Physical Mode:
Configure HT Status in use, containing HT(MM or GF), BW(20 or Auto), GI(Long or Auto),
and MCS(0~15, 32, or Auto) settings.
43