PLANET VC-202A User Manual

Page 20

DIP-1

DIP-2

DIP-3

DIP-4

Mode

Channel

Band Plan

SNR

OFF

Interleave Symm

9dB

ON (default) CPE

Fast

Asymm

6dB

CO / CPE

• CO (Central Office) – the Master device mode, usually

the CO device will be located at the data center of ISP or
enterprise to link to the backbone.

• CPE (Customer Premises Equipment) – the Slave device

mode, usually the CPE device will be located at branch
office, home or remote side as the long reach data
receiver. The CPE can be connected to the PC, IP Camera
or Wireless Access Point and etc network devices.

Note

When the Ethernet Over VDSL2 Converter operate
at CPE mode, the DIP switch 2,3,4 is no function.

Fast and Interleave mode

• Fast mode guarantees a minimum end to end latency less

than 1 ms.

• Interleaved mode provides impulse noises protection with

a duration less than 250 us. Interleaved mode has a
maximum end to end latency of 10m sec.

Band Plan

• User can switch the Band Plan either Symmetric or Asym-

metric by their own. When Symmetric is selected that
provides better upstream performance, when Asymmetric
is selected that provides better downstream performance.
Refer to table above for details.