Installing the converter – PLANET GTP-80x Series User Manual

Page 14

6. Installing the Converter

Please follow these steps to install the PoE+ Media converter:

Turn off the power of the device / station in a network to

which the GTP-80X will be attached.

Ensure that there is no activity in the network.

Attach fiber cable from the GTP-80X to the fiber network.

Attach a Cat.5 / 5e / 6 UTP cable from the 10/100/1000Base-T

network to the RJ-45 port on the GTP-80X.

Connect the 52V~56V DC power adapter to the GTP-80X and

verify that the Power LED lights up.

Turn on the power of the device / station, the TX Link and FX

Link LEDs should light when all cables are attached.

1000Base-SX/LX

SC Fiber

10/100/1000Base-T UTP

Figure 6-1: GTP-802 / GTP-802S Installation