PLANET FT-807 - Manual (Page 10)

6
There are 8 wires on a standard UTP/STP cable and each wire is
color-coded. The following shows the pin allocation and color of
straight cable and crossover cable connection:
Figure A-1: Straight-Through and Crossover Cable
Please make sure your connected cables are with same pin
assignment and color as above picture before deploying the cables
into your network.
A.2 100Mbps, 100Base-FX, SMI type connector
FT-807 is using POF SMI type connector that is mostly being
used for IEEE1394 transmission. The followings show the basic
information.
The POF Cable should be a dual wire cable with
0.98mm optic core with cladding diameter 1mm.
Also with jacket in diameter: 2.2 mm.
The SMI connector will as like the figure
left. You can check with your network
device dealer or administrator for the
availability of the cable and connector.