PLANET FT-1105A - Manual (Page 19)

16
LED indicator System: One
Power LED,
TP Port :
• One Speed
• One LNK/ACT
Fiber Port:
• One Link/Act,
• One FDX/Col System: One
Power LED,
TP Port :
• One Speed
• One LNK/ACT
Fiber Port:
• One Link/Act
DIP Switches DIP 1: On 3-Port Switch Mode
Off 2-Port Redundant
DIP 2: On Loop Back Reply Enable
Off Loop Back Reply Disable
Standards IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
IEEE 802.3x Flow Control
APPENDIX A
A.1 Device‘s RJ-45 Pin Assignments
■ 10/100Mbps, 10/100Base-TX
Contact MDI MDI-X
1 1 (TX +) 3
2 2 (TX -) 6
3 3 (RX +) 1
6 6 (RX -) 2
4, 5, 7, 8 Not used Not used
Implicit implementation of the crossover function within a twisted-
pair cable, or at a wiring panel, while not expressly forbidden, is
beyond the scope of this standard.