PLANET ET-509A - Manual (Page 6)

6
9. TP-BNC Technical Specifications
•
Standards : IEEE802.3 10Base-T/10Base-2
•
TP Port : RJ-45 jack with a slide switch for
"DTE" or "MPR" selection
BNC Port : BNC connector
• Cable and Distance :

Category 3/5 unshielded or shielded twisted pair (UTP/STP) wire, maximum length
100 meters (328ft)
 0.2 inch diameter RG-58A/U, 50 Ω
(ohm) coaxial cable, maximum length 185
meters(607ft)
•
Data Transfer Rate:
10Mbps at Half-duplex mode
• LED Indicators : BNC/Act, Power, TP Link/Act, Col
• Power Requirement : 1A@
+
5V
• Ambient Temperature : 0 °
to 50
°
C
• Humidity : 5% to 90%
• Dimensions : 26.2(H)
×
70.3(W)
×
94 mm(D)
10. DC Power Jack and AC-DC Power Adapter
The DC jack's central post is 2.5mm wide, it conforms to the
DC receptacle(2.5mm) on the 19-inch Converter Rack slot.
DC Jack
2.5mm
DC Input:
1A@+5V Keep the AC-DC adapter as spare
parts when Media converter is installed
in a 19-inch Media Converter Rack.
AC-DC power adapter
AC Input : 100
∼
240VAC 50/60Hz
DC Output: 1A@
+
5VDC
Part No.: EM-ET508V2