PLANET ET-509A - Manual (Page 4)

4
6. Connecting to 10/100Mbps N-Way Device
Converter Model 10/100 NWay Inter-operating
ET-508S* Single mode
TP-Fiber Converter
(Fdx/Hdx)
Non-Nway, it supports 10Mbps
only. Force the NWay partner
to 10Mbps speed at Fdx or Hdx
manully.
ET-508 Multi mode
TP-Fiber Converter (Hdx) 10/100Mbps is auto-sensing
and comes to 10Mbps Hdx
TP-BNC Converter
10/100Mbps is auto-sensing
and comes to 10Mbps Hdx
l ET-508S support Full-duplex mode operation that can double the bandwidth, please make sure the
TP ends device also support full-duplex and set to it as well.
l ET-508/ ET-509A support Hlaf-duplex mode only.
7. LED Description
ET-508/ ET-508S TP-Fiber Converter :
LED Color Function
FL
Link/Act
Green
Lit when Fiber connection is good
Blinks when any FL traffic is present
TP
Link/Act
Green
Lit when TP cable connection is good
Blinks when any FL traffic is present
Power Green Lit when
+
5V power is coming up
Collision Amber Blinks when any collision is present
ET-509A TP-BNC Converter:
LED Color Function
BNC Act Green Blinks when BNC traffic is present
Power Green Lit when
+
5V power is coming up
TP
Link/Act
Green
Lit when TP connection is good
Blinks when TP traffic is present
Collision Amber Blinks when any collision is present
8. ET-508/508S Technical Specifications
•
Models : a. ET-508S: Fdx/Hdx TP-Fiber Converter
b. ET-508: Hdx TP-Fiber Converter
• Standards : IEEE802.3 10Base-T/10Base-FL
• TP Port : RJ-45 jack with a slide switch for
"DTE" or "MPR" selection
Fiber Port : ET-508 (ST multi-mode)
ET-508S (ST single-mode),
•
UTP Cable : Cat. 3 or 5 cable up to 100m
Fiber Cable:
50/125, 62.5/125, or 100/140
µm multi-mode
8.3/125, 8.7/125, 9/125 or 10/125
µm single-mode