PLANET VIP-156PE - Manual (Page 13)

LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: root / no passwrd), browse to “Network”
--> “LAN Settings” configuration menu:
P in the adddress bar.
After logging on machine with username/password (default: root / no passwrd), browse to “Network”
--> “LAN Settings” configuration menu:
Parameter Description
Í Note
Please locate your PC in the same network segment
(192.168.0.x) of ATA. If you’re not familiar with TCP/IP,
please refer to related chapter on user’s manual CD or
consult your network administrator for proper network
configurations.
IP address LAN IP address of ATA
Default: 192.168.0.1
Subnet Mask LAN mask of ATA
Default: 255.255.255.0
Default Gateway Gateway of ATA
Default: 192.168.0.254
Network settings via Keypad commands
The ATA series phone adapters support telephone keypad configurations, please connect analog
telephone set and refer to the following table for machine network configurations.
IVR Menu Choice Machine operation Parameter(s) Notes:
#111# Set DHCP client None ATA will change to DHCP
13