PLANET VIP-156PE - Manual (Page 12)

2
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of ATA analog Phone Adapter ((“ATA” in the following term))
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem
Administration Interface
PLANET ATA provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
To start ATA web configuration, you must have one of these web browsers installed on computer for
management
•
Microsoft Internet Explorer 6.0.0 or higher with Java support
Default LAN interface IP address of ATA is 192.168.0.1. You may now open your web browser, and
insert http://192.168.0.1 in the address bar of web browser to logon ATA web configuration page.
ATA will prompt for logon username/password, please enter: root / null (no password) to continue
machine administration.
12