PLANET POE-171 - Manual (Page 18)

18
LED of POE-171 and “PoE IN” LED of POE-E201 will light up
continuously.
4 Connect the additional standard Ethernet cable that will be
used for connecting to the remote powered device (PD) to the
“OUT” port of POE-E201.
5. The “OUT” port is also the power injectors which transmit DC
Voltage to the standard network cable and transfer data and
power simultaneously between the POE-171 and PD.
6 Once POE-E201 detects the existence of an IEEE
802.3at/802.3af device, the “PoE OUT” LED indicator will be
steadily ON to show it is providing power.
802.3at
PoE Extender
Data
PoE PoE
+ Power
Power
Data + Power Data
100 meters 100 meters
200 meters
Power Line (AC)
AC
1000Base-T UTP
PoE
1000Base-T UTP with PoE
PoE IP Camera
POE-171
Figure 5: Connected architecture over POE-171 and POE-E201
Note
1. If the connected device is not fully complied
with IEEE 802.3at/802.3af standard or in-line
power device, the PoE OUT LED indicator of
POE-E201 will not be steadily on.
2. According to IEEE 802.3at/802.3af stan-
dard, the POE-E201 will not inject power to
the cable if not connected to a standard IEEE
802.3at/802.3af device.