PLANET POE-171 - Manual (Page 17)

17
Switch
Power 12V/19V/24V
POE-171S
100 meters
Power
Data
Power
Data
PoE
Power Data
AC DC
Laptop
1000Base-T UTP
PoE 1000Base-T UTP with PoE
Power Line (AC) AC
DC
Power Line (DC)
POE-171
Ultra PoE
Splitter
Ultra PoE Injector
Figure 4: Connected architecture over POE-171 and POE-171S
Note
1. According to IEEE 802.3at/802.3af Power
over Ethernet, the POE-171 will not inject
power to the cable if not connected to IEEE
802.3at/802.3af device.
2. Please ensure the POE-171S output voltage is
correct before applying power to remote device.
The POE-171S provides DC12V/19V/24V power
output.
5.4 The POE-171 and POE-E201 Installation
1. Connect the power adaptor to “52-56V DC IN” of POE-171;
the “PWR” LED will be steadily on.
2. Connect a standard Ethernet cable from “Ethernet+DC” port
of ultra PoE injector to the “IN” port of POE-E201.
3. The ultra PoE injector delivers both Ethernet Data and PoE
power over UTP cable to the POE-E201 and the POE In-use