PLANET POE-1200 - Manual (Page 29)

26
Figure 4-14 Configuration backup successes screen
■
Restore
The PoE Injector Hub will restore to previous backup/saved configuration while the “Restore” button be pressed. And
please note that once the Restore button be pressed, Web interface will disconnected for a while. Reload the Web browser
to re-login the system.
Figure 4-15 Configuration restore screen
■ Factory Reset
The Factory Reset button can reset the PoE Injector Hub back to the Factory default mode. Be aware that the entire
configuration will be reset, and the IP address of the PoE Injector Hub will be set to “192.168.0.100”.
Figure 4-16 Factory Reset screen
Once the Factory Reset item is pressed, the screen in Figure 4-17 appears.
Figure 4-17 Factory Reset screen