PLANET IPOE-E174 - Manual (Page 6)

6
„ Automatic address learning and address aging
„ Supports CSMA/CD protocol
 Industrial Case / Installation
„
IP30 aluminum case protection
„ DIN rail and wall-mount design
„ Supports EFT protection for 6000V DC power, and 6000V DC
Ethernet ESD protection
„ -40 to 75 degrees C operating temperature
„ No external power cable required for installation
„ Plug and Play installation
 Standard Compliance
„
IEEE 802.3 10BASE-T
„ IEEE 802.3u 100BASE-TX
„ IEEE 802.3ab 1000BASE-T
„ IEEE 802.3x Flow Control
„ IEEE 802.3at High Power over Ethernet
„ IEEE 802.3af Power over Ethernet
„ FCC Part 15 Class A, CE
Note
PSE (Power Sourcing Equipment) is a device (switch,
or hub for instance) that provides power in a PoE setup.
Maximum allowed continuous output power per such
device in IEEE 802.3af is 15.4W, and in IEEE 802.3at is
30W.
PD (Powered Device) is a PoE-enabled terminal by
PSE and thus consumes energy, such as PoE IP Phones,
PoE IP cameras, PoE wireless access points, etc.