3 ptz setting – PLANET ICA-HM351 User Manual

Page 53

63B

3.6.3 PTZ Setting

This page allow user to modify the RS-485 interface according to the P/T scanner.

Camera Protocol

This device can connect to a PTZ camera or speed dome camera and

controls them thru RS-485 interface.

Camera Address

This is the camera ID set in PTZ camera or speed dome camera.

Note that please DO NOT changes the default value if unnecessary.

If so, user needs to check and set value properly for both sides.

Baud rate

This is the communication speed between network module and P/T

scanner.

NOTE

If need to change these parameters, user needs to check and set

value properly for both, network module and P/T scanner.