PLANET IGS-10020HPT - Manual (Page 15)

15
7. Starting Web Management
The following shows how to start up the Web Management of the Industrial
Managed Switch. Note the Industrial Managed Switch is configured through an
Ethernet connection. Please make sure the manager PC must be set on the same
IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
IP Address:
192.168.0.x
IP Address:
192.168.0.100
IGS Industrial Switch
RJ45/UTP-Cable
Figure 7-1: IP Management Diagram
Logging in the Industrial Managed Switch
1. Use Internet Explorer 7.0 or above for Web browser and enter IP address
http://192.168.0.100 (the factory-default IP address) to access the Web
interface.
2. When the following dialog box appears, please enter the default user name
“admin” and password “admin” (or the password you have changed before) as
shown in Figure 7-2.
Default IP Address: 192.168.0.100
Default User Name: admin
Default Password: admin
Figure 7-2: Login Screen