beautypg.com

3 snapshot tab – PLANET ICA-8200 User Manual

Page 52

background image

2 Mega-pixel PoE / Wireless Fish-Eye IP Camera

ICA-8200/ICA-W8200

52

■ Trigger by GPIO

GPIO

On the defined days of the week and at certain time of the set days,
the Camera will trigger its GPIO Input Signal when its state
changes. Recording duration can be set in seconds and the video
record may be provided to host by e-mail/FTP, stored in the SD
card, activated GPIO Output Port or through all of them.

3.7.3 Snapshot Tab

The Snapshot tabbed pane sets the camera to take snapshot images when motion is detected.
The four methods available for selection are Always, Schedule, Motion, and GPIO, each of
which can be set up with user scheduled recording time and duration, as well as defining the
video record file target destination.

■ Trigger by Always

Always

Under this method, the camera automatically continues to capture
6 snapshots of the area under surveillance at every 1 or 2 seconds
at intervals. Three previous snapshot frames are collected from the
Camera buffer and 3 snapshot frames are captured live. The
stream of accumulated snapshots may be sent to host by e-mail or
FTP, or stored in the SD card as preferred.

This manual is related to the following products: