Chapter 2. hardware interface, 1 physical descriptions – PLANET ICA-4200 User Manual
Page 10
Ultra-mini Full HD Fixed Dome IP Camera
ICA-4200
10
Chapter 2. Hardware Interface
2.1 Physical Descriptions
Interface
Description
Audio In
User can enable the function of the built-in microphone via audio
setting in the Web UI.
Ethernet Port (PoE)
The LAN socket is an RJ45 connector for connection to
10BASE-T Ethernet or 100BASE-TX Fast Ethernet cabling. Not
only can this Ethernet port detect or negotiate the transmission
speed of the network automatically but also input power for
camera operation. Please use Category 5 cable to connect the
Network Camera to an 802.3af PoE network switch.
Lens
1/2.5" Progressive Scan CMOS.
DI
Digital input.
Micro-SD/SDHC Card
Slot
User can insert a micro SD card (up to 32G) into this slot for event
recording.
Reset Button
This button is used to restore all the factory default settings.
Sometimes restarting the camera will make the system return to a
normal state. If the system still got problems after restart, user can
restore the factory default settings and configure it again.
To restore the device, please follow the steps below:
1. Press ‘Reset’ button for 5 seconds to reset the device to the
factory default.
2. Login the camera using the default IP (
),
with “admin” for both username and password.
Restoring the factory default setting will lose all the
previous settings including IP address forever. User
needs to back up configuration file in advance before
restoring.