PLANET ICA-2200 - Manual (Page 42)

User’s Manual of ICA-2200
36
6.1.7. UPnP
UPnP is short for Universal Plug and Play, which is a networking a rchitecture that p rovides
compatibility among network ing equipment, software, and perip herals. This device is an UPnP
enabled Internet Camera. If your operating system is UPnP enabled, the device will automatically
be detected and a new icon will be ad ded to “My Network Places.” If you do not want to use the
UPnP functionality, it can be disabled
In addition, this device also provide s UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available from
the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to
an external HTTP port in the NAT router will be forwarded to the device.
UPnP
To enable or disable the UPnP service here.
Friendly Name
Shows the friendly name of this device here.
UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in
a NAT router on your network, us ing UPnP™. Note that UPnP™
must be enabled in the NAT router first.
Port Range
The port range will open in NAT router.
External IP address
Show the IP address and port for WAN access through Internet. If
NAT traversal is config ured successfully, user ca n use this I P
address and port to access this device.