Chapter 6. configuration & operation, Network configuration, Network – PLANET ICA-2200 User Manual
Page 35
User’s Manual of ICA-2200
29
Chapter 6. Configuration &
Operation
6.1. Network Configuration
6.1.1. Network
This section provides the menu of connecting the device through Ethernet cable.
MAC address
Display the Ethernet MAC address of the device. Note that user cannot
change it.
Obtain an IP address
automatically (DHCP)
Enable this checked box when a DHCP server is inst alled on the
network to i ssue IP address assignment. With t his setting, the IP
address is assigned automatically. If this d evice cannot get an IP
address within limited tries, the device will assign a default IP address
for 192.168.0.20.
If you do not select “O btain an IP address autom atically”, then you
need to enter these network parameters by yourself.