PLANET WGSW-28040 - Manual (Page 7)

7
5. Configure IP Address
The WGSW Managed Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follow:
 Show the current IP address
1. On "WGSW-28040#” prompt, enter “config”.
2. On "WGSW-28040 (config)#” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 5-1.
Figure 5-1: Show IP Information screen