PLANET WGSW-20160HP - Manual (Page 9)

9
6. Start Web Management
The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is configured through an Ethernet connection.
Please make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100,
then the manager PC should be set at 192.168.0.x (where x is a number between
1 and 254, except 100), and the default subnet mask is 255.255.255.0.
PC / Workstation
with
IE Browser
RJ-45/UTP-Cable
IP Address:
192.168.0.x
IP Address:
192.168.0.100
Figure 6-1: I P Management Diagram
Login the Managed Switch
1. Use Internet Explorer 7.0 or above Web browser. Enter IP address
http://192.168.0.100 (the factory default IP address or the one that you have
just changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default username and
password “admin” (or the password you have changed via console). The login
screen in Figure 6-2 appears.
Default Username: admin
Default Password: admin
Figure 6-2: Login Screen