PLANET WGSW-20160HP - Manual (Page 6)

6
4. Logon to the Console
Once the terminal is connected to the device, power on the Managed Switch. The
terminal will start running testing procedures.
Then, the login username and password are requested. The factory default
username and password are as follows, and the login screen in Figures 4-1
appears.
Username: admin
Password: admin
Figure 4-1: Managed Switch Console Login Screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.