PLANET MGSW-28240F - Manual (Page 6)

6
4. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the Managed Switch. The
console port of the Managed Switch is DCE already so that you can connect the
console port directly through the PC without the need of Null Modem.
PC / Workstation
with
Terminal emulation software
Serial Port
PLANET Managed Switch
RS-232
Serial Port
115200,8,n,1
A terminal program is required to make the software connection to the Managed
Switch. Windows’ Hyper Terminal program may be a good choice, or you can
download the other utility from Internet, such as Putty, TeraTerm.
1. Enables terminal emulator.
2. When the following screen appears, make sure that the COM port should be
configured as:
• Baud : 115200
• Data bits : 8
• Parity : None
• Stop bits : 1
• Flow Control : None