PLANET MGSW-24160F - Manual (Page 7)

7
5. Logon to the Console
Once the terminal has connected to the device, power on the Managed Switch, the
terminal will display that it is running testing procedures.
Then, the following message asks the login username and password. The factory
default username and password are admin both as following and the login screen
in Figure 5-1 appears.
Username: admin
Password: admin
Figure 5-1: MGSW-24160F Managed Switch Console Login Screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.