Logon to the console – PLANET GS-4210-16T2S User Manual
Page 6
6
4. Logon to the Console
Once the terminal is connected to the device, power on the Managed Switch and
the terminal will run self testing procedures. Then, the following message asks
to login user name and password. The factory default user name and password are
shown as follows and the login screen in Figure 4-1 appears.
Username: admin
Password: admin
Note
The following console screen based on GS-4210-24T2S will be the
same as that of GS-4210-16T2S.
Figure 4-1: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.