PLANET GS-4210-16T2S - Manual (Page 5)

5
3. Terminal Setup
To configure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type of console port of the Managed Switch.
RJ45 to RS232 Cable
Serial Port
11520,8,n,1
Managed Switch
Console
11520,N,8,1
PC / Workstation with
Terminal Emulation Software
Serial Port
Figure 3-1: Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
 Baud : 115200
 Data bits : 8
 Parity : None
 Stop bits : 1
 Flow control : None
Figure 3-2: COM Port Configuration