PLANET FSD-805 - Manual (Page 12)

12
Step 5: Supply power to the Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the power plug of the power cable to a
standard wall outlet.
When the Switch receives power, the Power LED should remain
solid Green.
Note
When need use the 100Base-FX port of FSD-
805SC / FSD-805ST and FSD-805S15, please
changed the DIP Switch on the left side. The DIP
Switch control the Port 1 runs at TP or Fiber oper-
ation mode.
Fiber or TP port choose