5 auto-negotiation, Egotiation – PLANET FGSW-2620CS User Manual

Page 76

User’s Manual of FGSW-2620CS

5.5 Auto-Negotiation

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible

bandwidth when a connection is established with another network device (usually at Power On or Reset). This is done

by detect the modes and speeds at the second of both device is connected and capable of, both 10Base-T and

100Base-TX devices can connect with the port in either Half- or Full-Duplex mode. 1000Base-T can be only con-

nected in Full-duplex mode.

- 76 -