PLANET FGSW-2620CS - Manual (Page 62)

User’s Manual of FGSW-2620CS
4.8.1 STP Bridge Settings
This section introduces detail information of STP Bridge Settings of Web Smart Switch; the screen in Figure 4-46 appears
and Table 4-26 descriptions the STP Bridge Settings Configuration of Web Smart Switch.
Figure 4-46 STP Bridge Settings Web Page Screen
The page includes the following fields:
Object Description
• STP Mode
The STP mode setting. Valid values are Disable, STP & RSTP. Default
mode is Disable.
• Bridge Priority The switch with the lowest value has the highest priority and is selected
as the root. If the value is changed, the user must reboot the switch.
The value must be a multiple of 4096 according to the protocol standard
rule.
• Hello Time
The time that controls the switch to send out the BPDU packet to check
STP current status.
Enter a value between 1 through 10.
• Max Age
The number of seconds a switch waits without receiving Spanning-tree
Protocol configuration messages before attempting a reconfiguration.
- 62 -