EVGA 170-BL-E762 - Manual (Page 67)

EVGA X58 SLI CLASSIFIED Motherboard
69
 Rank Interleave Setting
This function is allows you to select the Rank Interleave Setting. The options
are 1 way, 2 way and 4 way.
 Memory Parameters Settings
Use this menu to set optimal timings or to manually enter timings. Note that
you should set the value to Optimal to use the manufacturers’ recommended
values.
 Memory Low Gap
This function enables support for future add-on devices. It is recommended
to leave this at the default setting.
Voltage Control
Select
Voltage Control
from the Frequency/Voltage Control menu and press
Enter to display the Voltage Control menu.
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Defaults
EVGA VDroop control [With VDroop]
CPU VCore [Auto] 1.26875V
CPU VTT Voltage [Auto] +0mv
CPU PLL Vcore [Auto] 1.800V
IOH PLL Vcore [Auto] 1.800V
QPI PLL Vcore [Auto] 1.100V
DIMM Voltage [Auto] 1.500V
DIMM DQ Vref [+0mV] +0mv
IOH Vcore [Auto] 1.100V
IOH/ICH I/O Voltage [Auto] 1.500V
ICH Vcore [Auto] 1.050V
NF200 Voltage [Auto] 1.200V
VTT PWM Frequency [250 KHz] 250 KHz
CPU PWM Frequency [800 KHz] 800 KHz
CPU Impedance [Auto] Auto
QPI Signal Compensation [Auto] Auto
User should exercise caution when over-voltageing
,as it can cause system instability or enen void
warranties and danmage components.
Item Help
Main Level 
Phoenix – AwardBIOS CMOS Setup Utility
Voltage Control