EVGA 170-BL-E762 - Manual (Page 10)

EVGA X58 SLI CLASSIFIED Motherboard
12
I/O Shield
Installs in the system case to block radio frequency
transmissions, protect internal components from dust, foreign
objects, and aids in proper airflow within the chassis.
3 - 2-Port SATA Power Cables
Allows a Molex power connector to adapt to a SATA power
connector.
1 - 2-Port USB and 1-Port 1394 bracket
Provides one (1) additional IEEE1394a port to the back panel of
the chassis and provides two additional USB ports to the back
panel.
6 - SATA Data Cables
Used to support the Serial ATA protocol and each one connects
to a single drive to the motherboard.
1 - IDE-ATA 133 HDD Cable
Passes data between the IDE connection on the motherboard
and IDE device.
1 - 2-Way SLI Bridge
Bridges two (2) graphic cards together which allows for
2-Way SLI.
1 – 3-Way SLI Bridge
Bridges three (3) graphic cards together which allows for 3- Way
SLI.
1 – 3-Way SLI with PhysX TM Bridge
Bridges three (3) graphic cards with Physics card together which
allows for 3-Way SLI with PhysX TM technology.
1 - Installation CD
Contains drivers and software needed to setup the
motherboard.