EVGA 170-BL-E762 - Manual (Page 20)

EVGA X58 SLI CLASSIFIED Motherboard
22
 Serial ATA II
 Chassis Fans
 USB 2.0
 Expansion slots
 CMOS Clear Button
 Jumper Settings
See Figure 1 on page 14 to locate the connectors and jumpers referenced in the
following procedure.
24-pin ATX Power (PW1)
PW1 is the main power supply connector located along the edge of the board
next to the DIMM slots. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power
supply cable into the connector and make sure it is secure.
Figure 3. PW1 Motherboard Connector
PW1 connector
Plug power cable from system
power supply to PW1
Board edge