EVGA 170-BL-E762 - Manual (Page 54)

EVGA X58 SLI CLASSIFIED Motherboard
56
Onboard PATA/SATA Device
Press Enter to display the Onboard PATA/SATA Device menu.
 SATA Mode
This is allows you set the onboard Serial SATA mode.
 IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage
devices.
 RAID: Create a RAID 0, 1, 10, 5
 AHCI: Use the AHCI (Advanced Host Controller Interface) to enables
advanced SATA features for improved performance with NCQ and
Hot-plug features
 LEGACY Mode Support
This function allows the SATA controller to operate in LEGACY mode.
Selected Disabled if you install operating system that support Native mode.
 JMB362 SATA Controller
This function allows you to enable JMB362 SATA Controller. The options
are Auto, Enabled and Disabled.
 JMB363 SATA/PATA Controller
This function allows you to enable JMB363 SATA Controller. The options
are Auto, Enabled and Disabled.
 JMB363 Mode
This function allows you set the onboard JM363 mode. The options are IDE
Mode, RAID+IDE Mode, AHCI+IDE Mode, RAID Mode and AHCI Mode.
 JMB362 Mode
This function allows you set the onboard JM363 mode. The options are IDE
Mode, RAID Mode and AHCI Mode.
SATA Mode [IDE]
LEGACY Mode Support [Disabled]
JMB362 SATA Controller [Auto]
JMB363 SATA/PATA Controller [Auto]
JMB363 Mode [IDE Mode]
JMB362 Mode [IDE Mode]