Avago Technologies LSI53C120 - Manual (Page 22)

14 LSI20101/LSI20102 SCSI Bus Boards
4.4.2 SCSI Connectors J2 and J3
The SCSI interfaces on the LSI20102 board operate as a 16-bit,
synchronous or asynchronous SCSI bus and accommodates 8-bit SCSI
transfers. The SCSI interface connectors J2 and J3 are 68-pin, high
density, latching, right-angle receptacles and the pin definitions conform
to the X3T9.2/90-048 SE P cable recommendation. SCSI TERMPWR
can also be supplied by the board. Connector J2 is a SE only connector
and its pinout is the same as shown in
Table 2 . Table 8 shows the signal
assignments for J3, which is a High Voltage Differential (HVD)
connection.