Avago Technologies LSI SAS 9205-8e - Manual (Page 11)

LSISAS9205-8e PCI Express to 6Gb/s SAS HBA User Guide May 2011
LSI Corporation
- 9 -
7 Electrical and Environmental Specifications
The design and implementation of the LSI PCIe-to-SAS HBA minimizes electromagnetic emissions, susceptibility to
radio frequency energy, and the effects of electrostatic discharge. The board carries the CE mark, C-Tick mark,
Canadian Compliance Statement, Korean KCC, Taiwan BSMI, Japan VCCI, and FCC Class B, and it is marked with the FCC
Self-Certification logo. The board also meets the requirements of CISPR Class B.
7.1 Electrical Characteristics
The maximum power requirements for the LSISAS9205-8e HBA under normal operation are as follows:
 PCIe 12.0 V = 1.26 A
 Power = 15.15 W
 Operation range = 0 °C to 55 °C
7.2 Thermal and Atmospheric Characteristics
The atmospheric characteristics for the LSI PCIe-to-SAS HBA are as follows:
 Temperature range: 0 °C to 55 °C (dry bulb)
 Relative humidity range: 5% to 90% non-condensing
 Maximum dew point temperature: 32 °C
The following parameters define the storage and transit environment for the LSI PCIe-to-SAS HBA:
 Temperature range:
−45 °C to +105 °C (dry bulb)
 Relative humidity range: 5% to 90% non-condensing
7.3 Safety Characteristics
All LSI PCIe-to-SAS HBAs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked
with the supplier’s name or trademark, type, and UL flammability rating. Because these boards are installed in a PCIe
bus slot, all voltages are below the SELV 42.4-V limit.