Avago Technologies MegaRAID SAS 9265-8i - Manual (Page 3)

LSI Corporation | December 2010 Page 3
MegaRAID SAS 9265-8i RAID Controller Quick Installation Guide Product Overview
Quick Installation Guide
Thank you for purchasing the LSI™ MegaRAID
®
6Gb/s SAS 9265-8i RAID controller. Your
MegaRAID controller provides reliability, high performance, and fault-tolerant drive
subsystem management. Before you install your RAID controller, please take a few
minutes to read this quick installation guide. If you need more information about any
topic covered in this guide, refer to the related documents on your MegaRAID Universal
Software Suite CD.
Product Overview The MegaRAID SAS 9265-8i RAID controller is a PCI-Express, low-profile RAID controller
that offers a 6 Gb/s transfer rate. It controls eight internal SAS/SATA ports through two
SFF-8087 mini SAS 4i internal connectors.
The MegaRAID SAS 9265-8i RAID controller has a TMM02 unit, which is an on-board
512-MB or 1-GB non-volatile DDR3 1333MT/s transportable memory module. The
TMM02 unit connects remotely to the LSI intelligent Battery Backup Unit 09
(LSIiBBU09). For more information about the LSIiBBU09 unit, refer to the MegaRAID
LSIiBBU09 Intelligent Battery Backup Unit Quick Installation Guide on the
MegaRAID Universal Software Suite CD.
Figure 1 shows the MegaRAID SAS 9265-8i RAID controller.
Figure 1: MegaRAID SAS 9265-8i RAID Controller
MegaRAID SAS 9265-8i RAID Controller