Emerson 6 kVA - Manual (Page 12)

12
A New View On Configuring Your UPS
Each Liebert GXT2 6 kVA
and 10 kVA system is shipped with
Windows ® compatible software that
allows the user to program a variety of
operating parameters. This capability
allows you to customize the system’s
performance to your specific
requirements, providing a new level of
power protection control and
adaptability.
The software allows
configuration of
the following:
■ Output voltage selectable.
■ Enable or disable auto restart.
■ Select frequency converter mode:
■ 60Hz input/50Hz output with
no derating, bypass is disabled.
■ 50 Hz input/60 Hz output with
no derating, bypass is disabled.
■ Change the low battery warning
from the standard two minutes.
■ Select how often you want the
automatic battery test to occur.
■ Disable automatic battery test
if necessary.
■ Program the UPS for the number
of external battery cabinets
connected, allowing the UPS
to report the correct run time.
Communications For Power Monitoring And Control
The Liebert GXT2 6 kVA and 10 kVA systems offer a variety of communications
options to provide the monitoring and control capabilities demanded by
today's network computing systems. Operation can be monitored using:
■ Liebert MultiLink™ Automated System Shutdown Software
■ Liebert Nform™ Monitoring System
■ Liebert Universal Monitor And Remote Power
Monitor Panels
■ Third-Party Monitoring Systems
Liebert IntelliSlot
Web Card
Liebert IntelliSlot ™ Web Card
For enhanced UPS communications and
control, the Liebert IntelliSlot Web Card
will deliver SNMP and web-management
communications capability to a Liebert
GXT2 unit. This feature will provide
flexibility in how you monitor and control
your UPS over the network. The card is
also easily configurable to work in a
standard SNMP implementation and with
Liebert MultiLink shutdown software.
168997_SL23172:15615 govern 7/22/08 2:29 PM Page 13